Beautifinous.

*

Hey guys! I’m here with something a little different today, but still relevant. I’m sure that we’ve all had those moments where we put on some red lippie and then look into the mirror and think damn, why do my teeth look so yellow?! Well, thankfully, there are plenty of teeth whitening kits out there to help you whiten your teeth at home in a snap, and today I’m going to be reviewing a kit that I had sent to me recently and have been using to whiten my teeth at home over the last couple of weeks. 

The Oralgen NuPearl 32x Advanced Teeth Whitening Kit is a peroxide free teeth whitening kit that is designed to remove even the toughest of stains. It comes with 10 days worth of professional strength whitening treatment, a mouth guard with a NuBright LED light (and a case to store it in), an on the go whitening pen and a shade chart. 

Over the last two weeks I’ve been using both the main whitening kit and the on the go whitening pen and I’ve taken some before and after photos of my teeth. In this review you’re going to find my thoughts, how it was to use, how it was going over the fortnight and the results at the end. So let’s get started!

Application and Results:

Let’s start by taking a look at what the kit consists of. It comes with two syringes, a mouth guard, an LED light for the mouth guard, a case for the mouth guard and an on the go pen. Admittedly, from the get go, those syringes look far more terrifying than they actually are. I think it’s the instant association of syringes with needles that does it, but please be comforted by the fact that these syringes do not use needles and there’s no injections involved here. 

So how do we use them? Well, it’s actually very simple. You take the protection cap from the tip of the syringe and use it to squeeze out a 0.5ml of product on the top and bottom (one line of whitening product) of the mouth guard. You then use the tip to spread the product around, focusing mainly on where the visible teeth will be.

You then need to pop the mouth guard into your mouth along with the NuBright light in place in side it and stay like that for 25 minutes. Once the time is up, you take it out and rinse the mouth and the mouth guard with warm water. This can be done every day for ten days worth of treatment.

The on the go pen is used by twisting the bottom until product appears on the pen brush (think like certain lip glosses, concealers and highlighters), and then you need to brush a thin layer onto visible teeth, smile for 30 seconds, and then let sit on the teeth for 25 minutes before rinsing away with warm water. You can also use the mouth guard and NuBright light with the on the go pen if you wish to.

And how did I get on with it? Well, I’ll admit, I was actually a little confused at first. The instructions weren’t very specific on whether you needed to apply 0.5ml of product to both the top and the bottom of the guard, making 1ml in total, or 0.25ml to the top and bottom for 0.5ml in total. So the first time, I applied what I thought would be enough and it equated to about 0.5ml, so I assumed that was correct. I put the guard in my mouth and left it for 25 minutes, but something just didn’t feel right about the process. I felt like I’d gotten it wrong, I just couldn’t put my finger on what I’d done.

So on the second day I decided to try the 0.5ml on both top and bottom, which seemed like quite a lot of product. I popped it into my mouth and realised that it wasn’t sitting comfortably. I pulled at my top lip and then I realised why it felt wrong the day before - my lip was slightly stuck within the mouth guard after I put it in. So there we go. Pull at your lips a little to make sure there are no issues. I’m not a pro with mouth guards, so this may sound stupid if this is what you’re supposed to check and you use them often, so please excuse my ignorance. I thought I’d mention it in case someone else finds themselves in this predicament. I also say that part in the hopes that I’m not alone here! 

The on the go pen I have only used a handful of times, every few days or so. It is easy enough to use, but I do prefer to use it with the mouth guard. Without the guard it feels like I'm just rubbing it straight off, so at least with the guard I know it's doing its job!

Anyway, it took a few days, but I did begin to notice some difference with my teeth after daily use. I don’t feel that the change was super drastic though, even after the full duration of treatment, as you can see from my before and after photos below.

I will keep using the on the go pen, and I will see if that continues to raise my teeth by another shade, but at the same time I don’t want to go overly white that they don’t look natural or even Ross from Friends with the glow in the dark teeth level. 

If you have darker stains on your teeth, I honestly feel that you would see far more results than I did. 

I find that this kit is perfect for just starting out, and thankfully you won't need to keep repurchasing the set after the first time. You can buy refill syringes with more treatment to use with your guard and UV light, and the UV light requires a battery that you can change at home for further use. The on the go pen is also available separately, so you can just purchase what you need as and when you want or need it after buying the kit to start.

Do I recommend it? Yes, I do. I'm already planning on purchasing the refills to carry on again in a short while (I'm waiting a bit between treatments as to not overdo it) and I am looking forward to seeing the results in the future.

Product Rating: 7/10

You can purchase the Oralgen NuPearl 32x Advanced Teeth Whitening Kit from KlipShop.

What are your thoughts on the Oralgen NuPearl 32x Advanced Teeth Whitening Kit? What are your favourite teeth whitening products?

Let me know in the comments below!